Adjusting Parameters, ECC

Adjusting parameters, ECC

Adjusting parameters, ECC




In the event of certain types of problem with the climate control module (CCM), such as uneven heat distribution between the left and right-hand side, the problem can be remedied by adjusting the parameters.
Adjust the parameters as follows:
1. Ignition on
2. Click on the VCT2000 symbol
3. Select Start and wait for confirmation that activation is complete (Continue appears in the status window).
4. Ignition off, remove the key, remove the diagnostic lead, close all doors
5. Wait at least 1 minute
6. Switch on the ignition and connect the diagnostic lead
7. Select Continue and wait for confirmation that activation is complete (Funtion complete appears in the status window).





Continue - DONE

-------------------------------------------------