Inspection [02/2024 - ]: Procedure
- INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition C41-5(M-) - C41-6(M+) 20°C (68°F) 0.3 to 100 Ω *a Component without harness connected
(Throttle Body with Motor Assembly) - If the result is not as specified, replace the throttle body with motor assembly.
- Measure the resistance according to the value(s) in the table below.