Removal

2ZR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: REMOVAL

REMOVAL

1. REMOVE NO. 2 CYLINDER HEAD COVER Removal
2. REMOVE IGNITION COIL ASSEMBLY





(a) Disconnect the 4 ignition coil connectors.





(b) Remove the 4 bolts and 4 ignition coils.
NOTE: When removing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

3. REMOVE SPARK PLUG





(a) Using a 14 mm spark plug wrench, remove the 4 spark plugs.