LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Door Control Switch >> Inspection

Door Control Switch: Inspection

  1. INSPECT POWER WINDOW MASTER SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

    RESISTANCE SPECIFIED CONDITION

    Tester Connection Switch Condition Specified Condition
    1 (E) - 2 (L) Lock Below 1 Ω
    1 (E) - 2 (L) 1 (E) - 9 (UL) OFF (Free) 10 kΩ or higher
    1 (E) - 9 (UL) Unlock Below 1 Ω

    If the result is not specified, replace power window master switch.

    Fig 1: Identifying Terminals Of Power Window Master Switch Connector
    G06011258Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

    RESISTANCE SPECIFIED CONDITION

    Tester Connection Switch Condition Specified Condition
    3 (E) - 4 (L) Lock Below 1 Ω
    3 (E) - 4 (L)
    2 (UL) - 3 (E)    		 OFF (Free) 10 kΩ or higher
    2 (UL) - 3 (E) Unlock Below 1 Ω

    If the result is not specified, replace door control switch.

    Fig 2: Identifying Terminals Of Power Control Switch Connector
    G06011151Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals