LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sequoia Platinum, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control/Dynamic Control Systems >> Brake Actuator >> Reassembly

Brake Actuator: Reassembly

  1. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY 
    1. Using a T30 "TORX" wrench, install the actuator bracket with the 3 screws.

      Torque: 9.5 N*m (97 kgf*cm, 84 in.*lbf) 

scientia non olet · About LEMON Manuals