LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sequoia Platinum, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control/Dynamic Control Systems >> Brake Actuator >> Disassembly

Brake Actuator: Disassembly

  1. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY 
    1. Using a T30 "TORX" wrench, remove the 3 screws and actuator bracket.
      Fig 1: Identifying Brake Actuator Bracket Assembly
      G05159839Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals