Mass Air Flow Meter: Removal: Installation

INSTALL MASS AIR FLOW METER
1. Install a new O-ring to the MAF meter.
2. Install the MAF meter with the 2 screws.
3. Connect the MAF meter connector.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL RADIATOR SUPPORT OPENING COVER (See INSTALLATION )

Fig 1: Installing MAF Meter With Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.