Power Rear Quarter Window System: Inspection

INSPECT POWER QUARTER WINDOW SWITCH CONTINUITY

Fig 1: Identifying Power Quarter Window Switch Terminals

G02840414

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

POWER QUARTER WINDOW SWITCH CONTINUITY REFERENCE

Switch Position	Tester Connection	Specified Condition
CLOSE	3-7, 8-9	Continuity
OFF	6-7, 8-9	Continuity
OPEN	3 8, 6 7	Continuity
Illumination Circuit	1-5	Continuity

If continuity is not as specified, replace the switch.

Left side: INSPECT POWER VENT WINDOW MOTOR OPERATION

Fig 2: Inspecting Power Vent Window Motor Operation
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the window link moves to OPEN position.
2. Reverse the polarity and check that the window link moves to CLOSE position.
  
  Fig 3: Checking Window Link Moves To Close Position
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If operation is not as specified, replace the window motor.
Right side: INSPECT POWER VENT WINDOW MOTOR OPERATION

Fig 4: Inspecting Power Vent Window Motor Operation
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, and check that the window link moves to OPEN position.
2. Reverse the polarity and check that the window link moves to CLOSE position.
  
  Fig 5: Checking Window Link Moves To Close Position
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002