LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> 4Runner Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer Systems >> Component Tests >> Key Unlock Warning Switch

Key Unlock Warning Switch

  1. Disconnect electrical connector for key unlock warning switch. Key unlock warning switch is located on upper steering column bracket, near ignition lock cylinder. See Figure. Key unlock warning switch may also be referred to as unlock warning switch.
  2. Using ohmmeter, check that no continuity exists between terminals No. 1 and 2 at key unlock warning switch electrical connector with ignition key removed from ignition lock cylinder, and that continuity exists with ignition key installed in ignition lock cylinder. See Fig 1. Replace key unlock warning switch if defective. See KEY UNLOCK WARNING SWITCH  under REMOVAL & INSTALLATION.
    Fig 1: Identifying Terminals On Key Unlock Warning Switch Electrical Connector
    G00015693Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002