LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Lighting System) >> Rear Combination Light Assembly >> Installation

Rear Combination Light Assembly: Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cord assembly.
  2. Install the light assembly combination rear.

    Tightening torque: 

    7.5 N.m (0.8 kgf.m, 5.5 ft.lb)

  3. Install the cover assembly rear combination light.
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals