LEMON Manuals
: Even more car manuals for everyone
Home
>>
Subaru
>>
2021
>>
WRX Base
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 34 (Brake Control (Diagnostics))
>>
Work Support
>>
List
Work Support: List
WARNING:
This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
Work Support item
Contents
Reference
ABS Sequence Control Mode
Operate the valve and pump motor continuously to perform the ABS sequence control.
Ref. to
VEHICLE DYNAMICS CONTROL (VDC)>ABS SEQUENCE CONTROL
VDC Check Mode
Operate the valve and pump motor continuously to perform the VDC sequence control.
Ref. to
VEHICLE DYNAMICS CONTROL (VDC)>VDC SEQUENCE CONTROL
Brake Lamp Lighting Operation
Forcibly activate the brake light relay to illuminate the brake light.
Ref. to
VEHICLE DYNAMICS CONTROL (VDC)>BRAKE LAMP RELAY>OPERATION>BRAKE LIGHT LIGHTING OPERATION BY SUBARU SELECT MONITOR
VSC (VDC) Centering Mode
Set the steering angle sensor neutral position, and the lateral G sensor and longitudinal G sensor 0 (zero) point.
Ref. to
VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC CONTROL MODULE & H/U)>ADJUSTMENT>VDC SENSOR MIDPOINT SETTING MODE
Reading of parameter: ECM to SSM
Read VDC Control Module parameter data.
Ref. to
VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC CONTROL MODULE & H/U)>MAINTENANCE MODE>VDC CONTROL MODULE PARAMETER READING
Writing of parameter: SSM to ECM
Write the parameter data to the VDC Control Module.
Ref. to
VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC CONTROL MODULE & H/U)>MAINTENANCE MODE>VDC CONTROL MODULE PARAMETER WRITING
Selection of Parameter
Select and register parameters in the VDC Control Module.
Ref. to
VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC CONTROL MODULE & H/U)>MAINTENANCE MODE>VDC CONTROL MODULE PARAMETER SELECTION
Confirm on parameter
Parameters registered in the VDC Control Module are displayed.
Ref. to
VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC CONTROL MODULE & H/U)>MAINTENANCE MODE>VDC CONTROL MODULE PARAMETER CHECK
Brake Maintenance Mode
Used when inspecting and repairing parts related to rear brake.
Ref. to
PARKING BRAKE>PARKING BRAKE SYSTEM>OPERATION>BRAKE MAINTENANCE MODE
Electric Parking Brake Compulsion Release Mode
Release the electronic parking brake forcibly.
Ref. to
PARKING BRAKE>EMERGENCY RELEASE OF ELECTRONIC PARKING BRAKE>OPERATION