LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Front Hood Lock Assembly >> Inspection >> Unit Inspection

Unit Inspection

  1. CHECK HOOD SWITCH

    Measure the resistance between connector terminals.

    G13953456Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2 Open the front hood 1 MΩ or more
    3 - 2 Close the front hood 1 MΩ or more
  2. Replace the lock assembly front hood if faulty is found in the inspection.
scientia non olet · About LEMON Manuals