LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Primary Speed Sensor >> Removal

Primary Speed Sensor: Removal

CAUTION: Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.
  1. Disconnect the ground terminal from battery sensor. Refer to NOTE>NOTE>BATTERY .
  2. Remove the collector cover. Refer to INTAKE (INDUCTION) (EXCEPT FOR STI)>COLLECTOR COVER>REMOVAL .
  3. Remove the intercooler. Refer to INTAKE (INDUCTION) (EXCEPT FOR STI)>INTERCOOLER>REMOVAL .
  4. Clean the transmission exterior.
  5. Remove the primary speed sensor harness connector.
    G09481936Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the primary speed sensor and the spacer.
    G09482007Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals