LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX STI >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (2.5L) >> SI-DRIVE (SUBARU Intelligent Drive) Selector >> Removal

SI-DRIVE (SUBARU Intelligent Drive) Selector: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the console box. <Ref. to REMOVAL , Console Box.>
  3. Remove the multi-selector switch connector from the console box.
  4. Remove the screws and tabs holding the multi-selector switch to the console box and the multi-selector switch.
    Fig 1: Locating Multi-Selector Switch Tabs
    G06344737Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals