Rearview Camera System: Installation

CAUTION: Be sure to confirm the marker position, whenever the rearview camera is removed/installed/replaced.

Install each part in the reverse order of removal.

Tightening torque:

Sedan model

Rearview camera (bracket): 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Trunk lid garnish: 4.5 N.m (0.46 kgf-m, 3.3 ft-lb)

OUTBACK model

Rearview camera (bracket (nut)): 4.5 N.m (0.46 kgf-m, 3.3 ft-lb)

Rear gate garnish: 4.5 N.m (0.46 kgf-m, 3.3 ft-lb)

Rear wiper motor & wiper arm: Refer to REAR WIPER .