LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester X, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transaxle) >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the snap ring to the gear inner grove on the reduction driven gear.
  2. Install the ball bearing to the reduction driven gear using a press.
    NOTE: Use a new ball bearing.
    Fig 1: Identifying Ball Bearing
    G08564032Courtesy of SUBARU OF AMERICA, INC.
  3. Install the snap ring to reduction driven gear.
    Fig 2: Installing Snap Ring To Reduction Driven Gear
    G08564033Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals