Stop Light Switch: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install the stop light switch onto the bracket with screws and position it with the nut.
Adjust the stop light switch position, and then tighten the nut.
< Ref. to ADJUSTMENT , Stop Light Switch . >

Tightening torque:

8 N.m (0.8 kgf-m, 5.9 ft-lb)

Fig 1: Stop Light Switch Nut With Torque Specification
Courtesy of SUBARU OF AMERICA, INC.