LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Camshaft Position Sensor >> Removal >> Exhaust Side

Exhaust Side

  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle.
  3. Remove the under cover.
  4. Disconnect the connector from exhaust camshaft position sensor LH.
    Fig 1: Identifying Exhaust Camshaft Position Sensor LH
    G05667584Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the exhaust camshaft position sensor LH.
    Fig 2: Identifying Exhaust Camshaft Position Sensor LH
    G05667585Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the exhaust camshaft position sensor RH in the same procedure as LH.
scientia non olet · About LEMON Manuals