System Operation Check Mode
System Operation Check ModeOPERATION
1. COMMUNICATION LINE CHECK
1. On the [[Main Menu]] display, select {Each System Check}.
2. On the [[System Selection Menu]] display, select {Engine Control System}.
3. After engine type information is displayed, select [OK].
4. On the [[Engine Diagnosis]] display, select {System Operation Check Mode}.
5. On the [[System Operation Check Mode]] display, select the {Immobilizer System}.
6. Start the communication line check.
7. Is [[OK]] displayed on screen?
If displayed, go to step 9).
If not, go to step 10).
8. After diagnostic results, it is determined that the circuit is not shorted. Finish the communication line check.
9. If a problem is detected, repair the trouble cause. P1572
NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".