Power Window Switch: Service and Repair

Power Window Control Switch

REMOVAL

1. MAIN SWITCH
1. Disconnect the ground cable from battery.




2. Remove the screw cover by using a flat tip screwdriver.




3. Loosen the screw to remove power window main Switch.
4. Disconnect the connector.

2. SUB-SWITCH
1. Disconnect the ground cable from battery.




2. Remove the screw securing the switch panel.




3. Remove the switch panel.
4. Disconnect the connector.

INSTALLATION

1. MAIN SWITCH
Install in the reverse order of removal.

2. SUB-SWITCH
Install in the reverse order of removal.