LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback F6-3.0L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> Crankshaft Main Bearing >> Torque Sequence

Torque Sequence





1. Tighten all bolts in the numerical order as shown in the figure.





2. Retighten all bolts in the numerical order as shown in the figure.





3. Tighten all bolts 90° in the numerical order as shown in the figure.





4. Install the upper bolt to cylinder block.
Tightening torque: 25 Nm (2.5 kgf-m, 18 ft. lbs.)

scientia non olet · About LEMON Manuals