LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback F6-3.0L >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Service and Repair

Turn Signals: Service and Repair

Side Turn Signal Light Assembly

REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the scalp caps.
3. Remove the mirror.




4. Disconnect the harness connector, remove the 3 mounting screws and then remove the side turn signal light assembly.

INSTALLATION
Install in the reverse order of removal.
scientia non olet · About LEMON Manuals