LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> Transmission >> Clutch System >> Clutch Pedal >> Installation

Clutch Pedal: Installation

  1. Install in the reverse order of removal.
    CAUTION:
    • If cable clamp is damaged, replace it with a new one.
    • Never fail to cover outer cable end with boot.
    • Be careful not to kink accelerator cable.
    • Always use new clevis pins.
  2. Adjustment of clutch pedal and adjustment after pedal installation. See ADJUSTMENT  .
scientia non olet · About LEMON Manuals