Service Data
Service Data
| Front and rear bearing preload at companion flange bolt hole N (kgf, lb) | New bearing | T-type | 19.6 -- 28.4 (2.0 -- 2.9, 4.4 -- 6.4) |
| VA-type | 12.7 -- 32.4 (1.3 -- 3.3, 2.9 -- 7.3) | ||
| Used bearing | T-type | 8.34 -- 16.67 (0.85 -- 1.7, 1.87 -- 3.75) | |
| Side gear backlash mm (in) | T-type | 0.10 -- 0.20 (0.0039 -- 0.0079) | |
| VA-type | 0.05 -- 0.15 (0.0020 -- 0.0059) | ||
| Side bearing standard width mm (in) | 20.00 (0.7874) | ||
| Crown gear to drive pinion backlash mm (in) | T-type | 0.10 -- 0.20 (0.0039 -- 0.0079) | |
| VA-type | 0.10 -- 0.15 (0.0039 -- 0.0059) | ||
| Crown gear runout on its back surface mm (in) | Less than 0.05 (0.0020) | ||