LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Legacy Outback LL Bean Ed. AWD F6-3.0L >> Repair and Diagnosis >> Body and Frame >> Relays and Modules - Body and Frame >> Keyless Entry Module >> Service and Repair

Keyless Entry Module: Service and Repair

Keyless Entry Control Module

REMOVAL

1. Disconnect battery ground cable.
2. Remove glove box.
3. Remove nut, then remove keyless entry control module (B) and the other electrical control module (A) while disconnecting connector.




4. Disconnect keyless entry control module and the other electrical control module.

INSTALLATION
Install in the reverse order of removal.
scientia non olet · About LEMON Manuals