LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Legacy Outback Wagon F4-2.5L SOHC >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Keyless Entry >> Keyless Entry Module >> Service and Repair

Keyless Entry Module: Service and Repair

KEYLESS ENTRY CONTROL MODULE
1. Disconnect battery ground cable.
2. Remove glove box.




3. Remove nut, then remove keyless entry control module (B) and the other electrical control module (A) while disconnecting connector.
4. Disconnect keyless entry control module and the other electrical control module.
5. Installation is in the reverse order of removal.
scientia non olet · About LEMON Manuals