LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xB L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Rod Bearing Cap

Rod Bearing Cap

PISTON SUB-ASSEMBLY WITH CONNECTING ROD





Install and alternately tighten the bolts of the connecting rod cap in several steps.
Torque: 25 Nm (250 kgf-cm, 18 ft-lbf)





Mark the front of the connecting rod cap bolts with paint.
Retighten the cap bolts by 90°as shown in the illustration.
Check the crankshaft turns smoothly.
scientia non olet · About LEMON Manuals