LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction (2 Of 2) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure

Removal Procedure

Fig 1: Locating ECT Sensor, Boost Control Solenoid, & IAT Sensor
GM1389396Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the intake air temperature (IAT) sensor harness connector.
  2. Remove the IAT sensor bolt.
  3. While twisting the IAT sensor (3), pull the sensor from the engine.
scientia non olet · About LEMON Manuals