LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> General Electrical >> Repair Instructions - Control Modules >> Body Control Module (BCM) (707) >> To remove

To remove

  1. Carry out procedures before changing a control module .
  2. Remove the lower section of the dashboard. See DASHBOARD .
    Fig 1: Illustration For Step 2
    G05571137Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  3. Unplug the control module connector.
    Fig 2: Illustration For Steps 3-4
    G05571138Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Remove the control module by pressing in the 4 snap fasteners.
scientia non olet · About LEMON Manuals