LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> G8 Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Data Communication System >> Repair Instructions >> Data Link Resistor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Data Link Resistor
    GM2088410Courtesy of GENERAL MOTORS CORP.
  1. Connect the data link resistor (1) to the instrument panel harness.
  2. Tape the data link resistor (1) to the instrument panel harness.
  3. Install the instrument panel extension trim panel. Refer to Instrument Panel Extension Replacement .
  4. Install the front floor console side trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
  5. Install the knee bolster. Refer to Knee Bolster Replacement .
scientia non olet · About LEMON Manuals