LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Diagnostic Information and Procedures >> Checking Frame Alignment >> Frame-To-Body Alignment

Frame-To-Body Alignment

Check the frame-to-body alignment by inserting a 19 mm (3/4 in) diameter guide pin or drill bit into the frame-to-body guide pin holes. If the guide pins will not fit the frame the frame is not in correct alignment with the body. To realign the frame refer to Frame Replacement - Front (W/AWD)  or Frame Replacement - Front (W/FWD)  and Crossmember Replacement .

scientia non olet · About LEMON Manuals