With A/C

Control Assembly:

Vacuum Harness:

REMOVE OR DISCONNECT


1. Accessory trim plate.

2. Control assembly screws.

3. Control assembly.

4. Vacuum connectors, as necessary.


5. Electrical connectors, as necessary.


INSTALL OR CONNECT


1. Electrical connectors, as necessary.

2. Vacuum connectors, as necessary.

3. Control assembly.


NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."


4. Control assembly screws.

^ Tighten screws to 1.9 Nm (17 lbs. in.).


5. Accessory trim plate.

^ Check circuit operation.