LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Versa Note SV >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Power Window Control System) >> Removal And Installation >> Front Power Window Switch >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove screw (B) from front power window and door lock/unlock switch finisher assembly (1).
    Fig 1: Screw (B) And Power Window And Door Lock/Unlock Switch (RH) Finisher
    GNSAWKIA2505ZZ-505Courtesy of NISSAN NORTH AMERICA, INC.
  2. Remove front power window and door lock/unlock switch (RH) finisher assembly (1) using a suitable tool (A).

    MARU-H : Pawl

  3. Disconnect the harness connector from the front power window and door lock/unlock switch (RH).
  4. Separate front power window and door lock/unlock switch (1) from front power window and door lock/unlock switch (RH) finisher using a suitable tool.
    Fig 2: Removing Front Power Window Switch
    G08204188Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Do not bend back the pawls on the switch finisher too far or breakage may occur.

scientia non olet · About LEMON Manuals