Detailed Flow

Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis work sheet. Refer to "Diagnostic Work Sheet ".

>> GO TO 2.

Perform self-diagnosis with CONSULT.

Is there any DTC displayed? 

YES >> Record or print self-diagnosis results and freeze frame data (FFD). GO TO 3.

NO >> GO TO  4.

Perform the diagnosis applicable to the displayed DTC for "ABS" with CONSULT. Refer to "DTC Index ".

>> GO TO  7.

Check that the symptom is a normal operation that is not considered a system malfunction. Refer to "Description ".

Is the symptom a normal operation? 

YES >> INSPECTION END

NO >> GO TO 5.

Check that the warning lamp and indicator lamp illuminate.

• ABS warning lamp: refer to "Description ".
• Brake warning lamp: refer to "Description ".
• VDC OFF indicator lamp: refer to "Description ".
• VDC warning lamp: refer to "Description ".

Is ON/OFF timing normal? 

YES >> GO TO  6.

NO >> GO TO  2.

Perform the diagnosis applicable to the symptom for "ABS" with CONSULT.

>> GO TO 7.

Repair or replace the specified malfunctioning parts.

>> GO TO 8.

Perform self-diagnosis memory clear for "ABS" with CONSULT.

>> GO TO 9.

Perform the self-diagnosis again, and check that the malfunction is repaired completely.

Is no other DTC present and the repair completed? 

YES >> INSPECTION END

NO >> GO TO  3.