Removal And Installation: Installation

WARNING: This page is about a different car, the 2004 Infiniti M45 and 2003 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

Where positioning pin is used, be sure to securely insert it into the hole of mating part.
When installing front engine mounting bracket to cylinder block, first tighten two bolts on upper side. Then, tighten two bolts on lower side. (The same applies to both right and left.)

Fig 1: Installing Front Engine Mounting Bracket To Cylinder Block

Courtesy of NISSAN MOTOR CO., U.S.A.