LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Engine Controls Self-Diagnostics - Pathfinder) >> Programming >> Throttle Valve Closed Position Learning

Throttle Valve Closed Position Learning

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

"Throttle Valve Closed Position Learning" is an operation to learn the fully closed position of the throttle valve, monitoring the throttle position sensor output signal. It must be performed each time harness connector of electric throttle control actuator or ECM is disconnected.

  1. Make sure that accelerator pedal is fully released.
  2. Turn ignition on. Turn ignition off and wait at least 10 seconds.
  3. Ensure throttle valve moves during 10 seconds when ignition is off.
scientia non olet · About LEMON Manuals