LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> Injector Circuit >> Component Inspection >> Injector

Component Inspection: Injector

  1. Disconnect injector harness connector.
  2. Check resistance between terminals as shown in the figure.

    Resistance: 13.5 - 17.5+/- [at 20°C (68°F)] 

    Fig 1: Checking Resistance Between Terminals
    G00908230Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals