LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P1574: ASCD Vehicle Speed Sensor >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Start engine (VDC switch OFF).
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Drive the vehicle at more than 40 km/h (25 MPH).
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Displaying "DATA MONITOR" Mode
    G00782982Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals