Active Check Function
WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
Operation Description
When a door is locked or unlocked by keyfob operation, the vehicle turn signals flash and the horn sounds to verify operation.
- When a button on the keyfob is operated, the signal is sent from the remote controller and received by the keyless remote entry receiver.
- The received signal is sent to the BCM and compared with the registered ID number.
- If the ID number matches, the BCM sends the turn signal flashing and horn signal to the IPDM E/R.
- The IPDM E/R flashes the turn signal lamps and sounds the horn for each keyfob operation.
Operating function of hazard and horn reminder
OPERATING FUNCTION OF HAZARD AND HORN REMINDER
| C mode | S mode | |||
|---|---|---|---|---|
| Keyfob operation | Lock | Unlock | Lock | Unlock |
| Hazard warning lamp flash | Twice | Once | Twice | - |
| Horn sound | Once | - | - | - |
When a door is locked or unlocked by keyfob operation, the turn signal lamps are flashed and the horn sounds to verify operation.
- When a button on the keyfob is operated, the signal is sent from the keyfob and received by the remote keyless entry receiver.
- The received signal is sent from the remote keyless entry receiver terminal 2 to BCM terminal 20 and compared with the registered ID number.
- If the ID number matches, the BCM sends the turn signal flash signal to the IPDM E/R.
- The IPDM E/R supplies voltage, turning on each turn signal lamp.