LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1052 (Engine Control System) >> DTC P0182, P0183: FTT Sensor >> DTC Confirmation Procedure >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 5 seconds.
  4. If 1 st trip DTC is detected, go to DIAGNOSTIC PROCEDURE 
    Fig 1: Displaying Data Monitor Screen
    G00775647Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals