LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1052 (Engine Control System) >> DTC P0102, P0103: MAF Sensor >> DTC Confirmation Procedure >> Procedure For DTC P0102 >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait at least 5 seconds.
  4. If DTC is detected, go to DIAGNOSTIC PROCEDURE  .
    Fig 1: Displaying Data Monitor
    G00775319Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals