LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1992 >> Galant L4-2.0L SOHC >> Repair and Diagnosis >> Maintenance >> Alignment >> Service and Repair >> Rear Toe-In >> AWD Models

AWD Models

1. Measure toe-in using a suitable toe-in gauge.
2. If toe-in is not within specifications, adjust by equally moving the mounting bolts located on the crossmember side of the trailing arm. Moving the adjusting bolts one division on the scale will adjust the toe-in about .08 inch.
2. If toe-in is not within specifications, adjust by equally moving the mounting bolts located on the crossmember side of the trailing arm. Moving the adjusting bolts one division on the scale will adjust the toe-in about .08 inch.
scientia non olet · About LEMON Manuals