LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2006 >> Montego AWD V6-3.0L VIN 1 >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair

Engine Control Module: Service and Repair

POWERTRAIN CONTROL MODULE (PCM)







Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the cowl panel grille.
3. Disconnect the PCM electrical connectors.
4. Remove the bolt and the PCM.
- To install, tighten to 8 Nm (71 lb-in).

5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals