LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Controls - Basic Testing) >> Fuel System >> Fuel Pressure Release

Fuel Pressure Release

WARNING: This page is about a different car, the 1994 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

Remove 15A fuel pump fuse from interior fuse panel. Start engine. Allow engine to run until it stalls. Crank engine 4 or 5 times. If engine did not start, crank engine 4 or 5 times. Turn ignition off. Install fuse.

scientia non olet · About LEMON Manuals