Tweeter Removal/Installation

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

If the procedure is performed while holding the tweeter cone, it could deform the cone causing a malfunction. Therefore, perform the procedure while holding any part other than the cone.

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Remove the side speaker grille. (See SPEAKER GRILLE REMOVAL/INSTALLATION .)
Remove the screws.

Fig 1: Locating Tweeter Screws
Courtesy of MAZDA MOTORS CORP.
Remove the tweeter.
Disconnect the connector.

Fig 2: Locating Tweeter Connector
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.