LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Active Driving Display Inspection >> Not Using The M-MDS

Not Using The M-MDS

  1. After switching the ignition ON (engine off), switch the light switch within 5 s as follows.
    • OFF → TNS (parking lights) → OFF → TNS (parking lights) → OFF → TNS (parking lights) → OFF
  2. Switch the light switch (dimmer switch) within 5 s after Step 1 as follows.
    • OFF → Headlight HI ON → OFF → Headlight HI ON → OFF → Headlight HI ON → OFF
  3. Verify that the display screen of the active driving display changes each time the light switch is switched between OFF and TNS (parking lights).
    NUMBER OF TIMES LIGHT SWITCH IS SWITCHED BETWEEN OFF AND TNS (PARKING LIGHTS) DISPLAY SCREEN
    -
    G12237558Courtesy of MAZDA MOTORS CORP.
    1 time
    G12237559Courtesy of MAZDA MOTORS CORP.
    2 times
    G12190105Courtesy of MAZDA MOTORS CORP.
    3 times
    G12237560Courtesy of MAZDA MOTORS CORP.
    4 times
    G12237561Courtesy of MAZDA MOTORS CORP.
    5 times
    G12237562Courtesy of MAZDA MOTORS CORP.
    6 times
    G12237563Courtesy of MAZDA MOTORS CORP.