LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 3 Mazdaspeed, 2.3L Eng VIN 4 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [MZR 2.3 DISI Turbo] >> Manifold Absolute Pressure (Map) Sensor/Boost Air Temperature Sensor Removal/Installation

Manifold Absolute Pressure (Map) Sensor/Boost Air Temperature Sensor Removal/Installation

NOTE:
  • Because the boost air temperature sensor is integrated in the MAP sensor, replacing the boost air temperature sensor includes replacement of the MAP sensor/boost air temperature sensor.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .)
  3. Remove the dipstick pipe. (See OIL PAN REMOVAL/INSTALLATION .)
  4. Disconnect the MAP sensor/boost air temperature sensor connector.
  5. Remove the MAP sensor/boost air temperature sensor.
    Fig 1: Locating MAP Sensor/Boost Air Temperature Sensor With Torque Specifications
    G08155457
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals