Transmitter Battery Replacement [Keyless Entry System]: Notes
TRANSMITTER BATTERY REPLACEMENT PROCEDURE CHART [KEYLESS ENTRY SYSTEM]
| Step |
Procedure |
Action after procedure |
| 1 |
Disconnecting key from transmitter
- Insert a flathead screwdriver into the transmitter notch and remove the key from the transmitter by pressing the tab.
|
Go to the next step. |
| 2 |
Notch position verification
- Verify the position of the transmitter notch.
|
- For the A-type notch, go to Step 3.
- For the B-type notch, go to Step 6.
|
| 3 |
Opening transmitter
- Insert a flathead screwdriver into the transmitter notch and open the transmitter.
|
Go to the next step. |
| 4 |
Battery Removal
- Press the hook in the direction of the arrow and remove the battery using the flathead screwdriver.
|
Go to the next step. |
| 5 |
Battery installation
- Install the new battery (CR1620) with the positive (+) pole facing up.
|
Go to Step 9. |
| 6 |
Opening transmitter
- Insert a flathead screwdriver into the transmitter notch and open the transmitter.
|
Go to the next step. |
| 7 |
Battery removal
- Remove the battery by pressing it in the direction of the arrow shown in the illustration.
|
Go to the next step. |
| 8 |
Battery installation
- Install the new battery (CR1620) with the plus pole facing down.
|
Go to the next step. |
| 9 |
Cover installation
- Align the upper and lower covers and close the transmitter.
- Install the key to the transmitter.
|
Go to the next step. |
| 10 |
Verification of key and transmitter connection
- When connecting the key to the transmitter, grip the key and the transmitter as shown in the illustration and connect until a click sound is heard.
NOTE:
- If the key is not completely connected to the transmitter, they may come apart.
|
Procedure is completed |