Front Fender Liner: Service and Repair

FENDER SPLASH SHIELD REMOVAL/INSTALLATION






1. Remove the 3 fender splash shield bolts.
- To install, tighten to 5 N.m {0.5 kgf.m, 44 in.lbf}.






2. Remove the 7 fender splash shield pin-type retainers.
3. Remove the 6 fender splash shield screws.
- To install, tighten to 5 N.m {0.5 kgf.m, 44 in.lbf}.

4. Remove the fender splash shield.
5. To install, reverse the removal procedure.