LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 L4-2.3L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Keyless Entry >> Keyless Entry Receiver >> Service and Repair

Keyless Entry Receiver: Service and Repair

KEYLESS RECEIVER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Disconnect the keyless receiver module connector.




4. Remove the nut, then remove the keyless receiver.
5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals